SECRETARY OF LABOR,
Complainant,
v.
COMPASS STEEL ERECTION, INC.,
Respondent.
OSHRC Docket No. 90-0354-S
ORDER
This matter is before the Commission on a Direction for Review entered by Chairman
Edwin G. Foulke, Jr. on October 24, 1990. The parties have now filed a Stipulation and
Settlement Agreement.
Having reviewed the record, and based upon the representations appearing in the
Stipulation and Settlement Agreement, we conclude that this case raises no matters
warranting further review by the Commission. The terms of the Stipulation and Settlement
Agreement do not appear to be contrary to the Occupational Safety and Health Act and are
In compliance with the Commission's Rules of Procedure.
Accordingly, we incorporate the terms of the Stipulation and Settlement Agreement into
this order. This is the final order of the commission in this case. See 29 U.S.C.
§§ 659(c), 660(a) and (b).
Edwin G. Foulke, Jr
Chairman
Velma Montoya
Commissioner
Donald G. Wiseman
Commissioner
Dated: November 19, 1990
ELIZABETH DOLE, SECRETARY OF LABOR,
Complainant,
v.
COMPASS STEEL ERECTION, INC.,
Respondent.
OSHRC Docket No. 90-0354-S
STIPULATION AND SETTLEMENT AGREEMENT
I
The parties have reached agreement on a full and complete settlement and disposition of the issues in this proceeding which are currently pending before the Commission.
II
It is hereby stipulated and agreed by between the Complainant, Secretary of Labor, and
the Respondent, Compass Steel Erection Inc., that:
1. Respondent represents that all of the alleged violations for which it was cited have
been abated and shall remain abated.
2. Complainant hereby amends Citation 1, item 1 to characterize the alleged violation of
29 C.F.R. 1926.351(b)(2) as other than serious. The proposed penalty for this citation is
$360.
3. Respondent hereby agrees to withdraw its notice of contest to Citation 1, as amended
above, and to Citation 2, items I through 4.
4. Each party agrees to bear its own fees and other expenses incurred by such party in
connection with any stage of this proceeding.
5. Respondent states that there are no authorized representatives of affected employees.
6. The parties agree that this Stipulation and Settlement Agreement is effective upon
execution.
7. Respondent certifies that a copy of this Stipulation and Settlement Agreement was
posted at its main office on the 18 day of October, 1990, in accordance with Commission
Rules 7 and 100, and remained posted for a period of ten days.
ROBERT P. DAVIS
Solicitor of Labor
CYNTHIA L. ATTWOOD
Associate Solicitor for
Occupational Safety and Health
DONALD G. SHALHOUB
Deputy Associate Solicitor for
Occupational Safety and Health
DANIEL J. MICK
Counsel for Regional
Trial Litigation
D. W. DURHAM (Date)
ORLANDO J.
PANNOCCHIA (Date)
Vice-President
Attorney for the
Compass Steel Erection, Inc. Secretary of Labor
SECRETARY OF LABOR,
Complainant,
v.
COMPASS STEEL ERECTION, INC.,
Respondent.
OSHRC Docket No. 90-0354-S
APPEARANCES:
Daniel T. Curren, Esq., for the Complainant.
D. W. Durham, for the Respondent.
DECISION AND ORDER
L. LaVecchia, Judge
This proceeding arises under Section 10 of the Occupational Safety and Health Act of 1970
(29 U.S.C. § 651 et seq.), referred to as the "Act."
The respondent was cited by the Occupational Safety and Health Administration, also known
as "OSHA," for alleged violations of the safety and health standards promulgated
under the Act.
A hearing was held in the matter on June 8, 1990, at Dallas.
After amending the citations at the outset of the hearing, the complainant alleges that
the respondent violated the following standards in the manner indicated:
Item 1 of Citation No. 1 (Serious) alleges that the respondent violated the standard set
forth at 29 CFR 1926.351 (b)(2) for failing to insulate completely exposed metal parts of
cable lugs used to connect or splice lengths of welding cables to each other.
The standard states that "only cable free from repair or splices for a minimum
distance of 10 feet from the cable end to which the electrode holder is connected shall be
used, except that cables with standard insulated connectors or with splices whose
insulating quality is equal to that of the cable are permitted."
Citation No. 2, characterized as "other than serious" alleges, as amended, that
the respondent violated the standard set forth at 29 CFR 1926.59(e)(1) by failing to
develop, implement, or maintain at the work site a written hazard communication program
for use by employees using materials such as acetylene, oxygen, and welding rods.
Under 29 CFR 1926.59(e)(1)(ii) the respondent allegedly violated the standard by not
having a written hazard communication program with a complete list of the hazardous
chemicals known to be present in the work area, such as acetylene, oxygen, and welding
rods.
Under 29 CFR 1926.59(e)(2) the respondent allegedly violated the standard by not having a
written hazard communication program in accord with the methods prescribed in pertinent
sections of the standard.
Under 29 CFR 1926.350(j) (Section 3.2.4.3 ANSI 249.1-1967 as adopted by this standard, the
respondent allegedly violated the Standard by storing an oxygen and acetylene bottle next
to one another while tied to a guard rail in a stairwell. The standard requires that these
materials be separated because of their combustible nature by a distance of at least 20
feet or by a non-combustible barrier with an appropriate fire-resistance rating.
THE FACTS
On November 13-14, 1989 the respondent's construction site in Fort Worth, Texas was
inspected by Jeffery Jones, a compliance officer employed by the Occupational Safety and
Health Administration ("OSHA"). The respondent company was one of the
subcontractors performing work at the work site. The CO found that the respondent was
operating a Lincoln are welding machine in an area where there were several welders at
work. The stinger cable on the Lincoln welder showed evidence of damage which had been
taped over with duct tape. Three areas within a 10- foot length of the stinger cable were
found to be so taped. Duct tape is not considered to be an adequate insulating tape for
wrapping damaged portions of cable. (Tr. 7-12). Interviews with respondent's
representative confirmed that the welder was being used in the head house of the elevator.
The infraction was considered serious because an employee exposed to the damaged areas
could sustain an electrical shock. The tape itself showed evidence of being frayed and
worn. Minor burns to severe burns or death could result from an electrical shock. The
electricity involved is direct current of about 10 volts and 170 amperes. (Tr. 15-16). The
higher the amperes the greater is the risk of serious injury.
The CO found that the respondent's hazard communication program was inadequate in that
several areas in the written program were not covered. Labeling processes were not
mentioned, nor was there any information with respect to the maintenance of material
safety data sheets. These sheets are used to inform employees about the chemicals in use
at the work site, and how to deal with them. (Tr. 22). Hazardous chemicals in use at the
work site included acetylene, a fire hazard, and oxygen, a supporter or causant ant of
fire hazards. (Tr. 24). Welding rods are also considered hazardous because of the fumes
they generate.
The fact that employees were working in a confined space increased the hazards to which
the employees might have been exposed. For example, metal fumes caused by welding can
result in metal fume fever being experienced by employees working in a confined space.
Lead fumes could also be generated by working in a confined space as welders.
The CO was also of the opinion that escape routes had not been established for the benefit
of the employees in the event it became necessary to quickly evacuate the small space in
the head house.
The employees were not advised of the procedures to be followed in multi-employer work
sites, such as the one in question here. The respondent's representative asserted that all
of the alleged violations would be abated.
The CO discovered a bottle of acetylene and a bottle of oxygen placed alongside each other
near a stairwell. In the event of a fire this would present a dangerous mix of materials,
and the storage of these two items in close proximity is prohibited by the standard.
However, the respondent stated that the two items were placed in the position found only
for the purpose of being picked up after the job was completed.
DISCUSSION
The respondent's representative, Mr. D.W. Durham, did not feel that the use of duct
tape for repairing damaged sections of cable connections on the arc welder represented any
substantial danger of electrical shock to employees using the apparatus. He indicated that
duct tape had been used because it was found to be more durable than regular insulating
tape. On the other hand, there is no evidence that he ever applied for a variance on that
theory, and the CO's explanation of the electrical hazard involved in the custom is
persuasive. I will find that there was a serious violation of the standard involved. The
respondent should either apply for a variance or discontinue the practice of using duct
tape for the purpose described.
The respondent has been aware of the hazard communication standards and appears to have
made a diligent effort to comply with the standards. The respondent's interpretation of
the language of the program has been somewhat confused, but in view of the complex matters
dealt with in the standards, I will find that the violations were de minimis
in character.
The acetylene and oxygen were not found to be in storage at the time of the alleged
violation, but a reasonable interpretation of the standard would extend the prohibition to
the mixing of the two in close proximity in almost any circumstances. A violation will be
found, but it will also be found to be de minimis.
CONCLUSIONS
1. The Commission has jurisdiction in this matter.
2. The respondent was in serious violation of 29 CFR 1926.351(b)(2) as alleged in the
citation and complaint. The proposed civil penalty of $360 is appropriate.
3. The respondent was in de minimis violation of Items 1 through 4 in
Citation No. 2. No penalty is assessed in these circumstances.
ORDER
1. Item 1 of Citation No. 1 is affirmed, with a civil penalty of $360 assessed for the
violation.
2. Items 1 through 4 of Citation No. 2 are affirmed as de minimis
violations, with no penalty assessed.
So ORDERED.
Louis G. LaVecchia
Judge, OSHRC
DATED: September 14, 1990
DALLAS